Snake Creek at FM 1952 water level

Fort Bend County gauge 8565 · Snake Creek · published on the Harris County Flood Warning System

This gauge has been recorded here since October 21, 2026 (3 readings so far). Its usual range and how today compares with its history appear once it has 14 days of readings.

Last 7 days

Hourly averages of readings as published. This gauge reports only when its value changes, so gaps in the line are normal.

How to read this gauge

The number above is an elevation, not a water depth. It is the height of the water surface above a fixed reference level, so FM 1952 reads around 114 ft even when the channel is low. What matters is the distance to the top of bank: the elevation at which water reaches the top of the channel at this location. For this gauge that is 120.5 ft.

The bottom of the channel here sits at 113.0 ft, so the channel is roughly 7.5 ft deep at this crossing. Fort Bend County publishes the top-of-bank figure with each reading; it is their reference, not an estimate made here.

Daily highs and lows since October 21, 2026

Download the readings

snake-creek-at-fm-1952.csv (CSV): every reading stored for this gauge since October 21, 2026, 3 rows, updated with this page. Columns: time in UTC, time in Central, water surface elevation, top of bank, and distance below top of bank, all in feet. The source and accuracy notes below apply to the file too.

Put this gauge on your website

HOAs, MUDs, civic clubs and schools can show this gauge's latest reading on their own site. Paste this HTML where it should appear; the card updates with this page. More gauges.

Other gauges on Snake Creek

Readings from the rest of the Snake Creek gauge network, each at its own most recent reading. Elevations fall as the channel runs downstream, so compare the below top of bank column rather than the raw levels.

All Fort Bend County gauges: Fort Bend County water levels.